$338.00Original price was: $338.00.$290.00Current price is: $290.00.
Factory Second with a small scratch on the bottom edge. Please refer to the photo of the scratch.
SIZE: 450mm X 1000mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall.
$338.00Original price was: $338.00.$270.00Current price is: $270.00.
Factory Second with scratches on left and right bottom corners and sides. Also a gouge on top right hand corner
SIZE: 450mm X 1000mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall.
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall.
$273.00Original price was: $273.00.$200.00Current price is: $200.00.
Factory Second with slight gap in bottom right hand inner frame corner. Please see attached photo.
This is the new sandy textured finish table with easy change corner trims.
SIZE: 450mm x 650mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall.
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with scratches on four backside frame (not noticeable once installed), some minor scratches on side and corner.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some minor scratches on sides and corners.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with scratches on four backside frame (not noticeable once installed), some scratches on side and corner.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some one noticeable scratch on bottom rail and some scratches on side and corner, foam tape on backside.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$213.00Current price is: $213.00.
Factory Second with a couple deep scratches and some minor scratches on frame sides and corners.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some minor scratches on sides and corners, one minor paint chip table top corner.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some minor scratches on table surface and corners, pre-fit with backing foam.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some minor scratches on table surface and corners, pre-fit with backing foam.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some minor scratches on table surface and corners, pre-drill reflector holes on bottom corner.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$223.00Current price is: $223.00.
Factory Second with some minor scratches on table surface, body and corners.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun
$303.00Original price was: $303.00.$130.00Current price is: $130.00.
Factory Second with visible scratches on table surface, body and corners. Table body: Bottom right has deep scratches near the edge with some light scratches on the left. Top middle has some scratches. The back of the table prepped with foam tape.
SIZE: 450mm x 800mm
The LIFESTYLETABLE™ is a low profile folding table that is easily attached to the side of your caravan or RV, without cutting a large hole into your exterior wall. Australian designed and manufactured with quality stainless steel, aluminium extrusion and die-cast aluminium corners. The sturdy construction allows for a maximum weight allowance of 25kg.
Easy to install with a drill, screwdriver, and a rivet gun